skyworks solutions, inc. ? phone [781] 376-3000 fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com 200126 rev. a skyworks proprietary information products and product information are subject to change without notice. january 10, 2005 1 AS196-307, AS196-307lf: gaas ic high isolation spdt non-reflective switch with driver dc?6.0 ghz data sheet features positive voltage control (0/+3 to 0/+5 v) high isolation (55 db @ 0.9 ghz and 1.9 ghz) lpcc 4 x 4 mm package integrated silicon cmos driver non-reflective available lead (pb)-free msl-2 @ 250 c per jedec j-std-020 lpcc 4 x 4 (-307) description the AS196-307 is a gaas fet ic spdt non-reflective switch packaged in a 16 lead leadless exposed pad plastic package for low cost, high isolation commercial applications. ideal building block for base station applications where synthesizer isolation is critical. typical applications include gsm, pcs, wcdma, 2.4 and 5.8 ghz ism and wireless local loop. parameter (1) frequency min. typ. max. unit insertion loss dc?2.0 ghz 0.9 1.15 db dc?3.0 ghz 1.0 1.25 db dc?4.0 ghz 1.2 1.4 db dc?6.0 ghz 1.6 2.0 db isolation (2) dc?2.0 ghz 50 55 db dc?3.0 ghz 43 50 db dc?4.0 ghz 35 40 db dc?6.0 ghz 25 30 db vswr (on state) dc?2.0 ghz 1.3:1 1.5:1 dc?6.0 ghz 1.3:1 1.6:1 vswr (off state) 0.5?6.0 ghz 1.35:1 1.7:1 electrical specifications (0, +5 v) -40 c to +85 c pin 1 indicator pin 1 0.026 (0.65 mm) bsc 0.110 (2.79 mm) 0.002 (0.05 mm) 0.110 (2.79 mm) 0.002 (0.05 mm) 0.076 (1.95 mm) bsc 0.076 (1.95 mm) bsc 0.016 (0.40 mm) ref. 0.013 (0.325 mm) ref. 0.157 (4.00 mm) 0.008 (0.20 mm) sq. -b- -a- 0.10 0.015 (0.387 mm) ref. 0.033 (0.85 mm) 0.004 (0.10 mm) top view bottom view 1. all measurements made in a 50 ? system, unless otherwise specified. 2. backside of exposed pad must be connected to rf ground to obtain specified isolation. skyworks offers lead (pb)-free ?environmentally friendly? packaging that is rohs compliant (european parliament for the restriction of hazardous substances). new
skyworks solutions, inc. phone [781] 376-3000 fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com january 10, 2005 skyworks proprietary information products and product information are subject to change without notice. 200126 rev. a data sheet ? AS196-307, AS196-307lf 2 vswr, 25 ?c v cc = +5 v, v ctl = 0/+5 v vswr frequency (ghz) 0123456 1.0 1.2 1.4 1.6 1.8 2.0 s 11 on s 22 off s 22 on 1. video feedthru measured for 3 ns risetime pulse. 2. v cc must be powered on by a minimum of 10 ns prior to v ctl . parameter condition frequency min. typ. max. unit switching characteristics (1) rise, fall (10/90% or 90/10% rf) 30 ns on, off (50% ctl to 90/10% rf) 50 ns video feedthru 25 mv input power for 1 db compression 0/+3 v 0.9?6.0 ghz 17 21 dbm 0/+5 v 0.9?6.0 ghz 24 27 dbm intermodulation intercept point (ip3) for two-tone input power +8 dbm 0/+3 v 0.9?6.0 ghz 30 38 dbm 0/+5 v 0.9?6.0 ghz 38 46 dbm control voltage (2) low (?0?) 0 0.5 v high (?1?) v cc ?0.6 v cc v control current v ctl = ?0? or ?1?. vcc = 2.6 to 5 v 5 a supply voltage v cc 2.6 3 5 v supply current v cc = +3 v 10 50 a v cc = +5 v 20 100 a operating characteristics (0, +5 v) -40 c to +85 c insertion loss, 25 ?c v cc = +5 v, v ctl = 0/+5 v insertion loss (db) frequency (ghz) 0123456 -2.50 -2.25 -2.00 -1.75 -1.50 -1.25 -1.00 -0.75 -0.50 -0.25 0 j 1 ?j 2 j 1 ?j 3 isolation, 25 ?c v cc = +5 v, v ctl = 0/+5 v isolation (db) frequency (ghz) 0123456 -70 -60 -50 -40 -30 -20 -10 0 j 1 ?j 2 j 1 ?j 3 typical performance data (0, +5 v)
data sheet AS196-307, AS196-307lf skyworks solutions, inc. phone [781] 376-3000 fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com 200126 rev. a skyworks proprietary information products and product information are subject to change without notice. january 10, 2005 3 isolation, 85 ?c v cc = +5 v, v ctl = 0/+5 v isolation (db) frequency (ghz) 0123456 -70 -60 -50 -40 -30 -20 -10 0 j 1 ?j 2 j 1 ?j 3 vswr, 85 ?c v cc = +5 v, v ctl = 0/+5 v vswr frequency (ghz) 0123456 1.0 1.2 1.4 1.6 1.8 2.0 s 11 on s 22 off s 22 on insertion loss, 85 ?c v cc = +5 v, v ctl = 0/+5 v insertion loss (db) frequency (ghz) 0123456 -2.50 -2.25 -2.00 -1.75 -1.50 -1.25 -1.00 -0.75 -0.50 -0.25 0 j 1 ?j 2 j 1 ?j 3 insertion loss, -40 ?c v cc = +5 v, v = 0/+5 v insertion loss (db) frequency (ghz) 0123456 -2.50 -2.25 -2.00 -1.75 -1.50 -1.25 -1.00 -0.75 -0.50 -0.25 0 j 1 ?j 2 j 1 ?j 3 isolation, -40 ?c v cc = +5 v, v ctl = 0/+5 v isolation (db) frequency (ghz) 0123456 -70 -60 -50 -40 -30 -20 -10 0 j 1 ?j 2 j 1 ?j 3 vswr, -40 ?c v cc = +5 v, v ctl = 0/+5 v vswr frequency (ghz) 0123456 1.0 1.2 1.4 1.6 1.8 2.0 s 11 on s 22 off s 22 on
skyworks solutions, inc. phone [781] 376-3000 fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com january 10, 2005 skyworks proprietary information products and product information are subject to change without notice. 200126 rev. a data sheet AS196-307, AS196-307lf 4 j 2 gnd n/c gnd gnd n/c n/c gnd gnd gnd 50 50 gnd j 3 v cc v ctl j 1 gnd 1 2 3 4 12 11 10 9 16 15 14 13 5 6 7 8 c bl c bl c bl pin out (bottom view) ?0? = 0?0.5 v. ?1? = 3.5?5 v. v cc = 5 v. c bl = 47 pf for operation > 500 mhz. v ctl j 1 ?j 2 j 1 ?j 3 0 insertion loss isolation 1 isolation insertion loss truth table characteristic value rf input power 1 w max. > 500 mhz, 0/+8 v control control voltage -0.2 v, +8 v operating temperature -40 c to +85 c storage temperature -65 c to +150 c jc 25 c/w absolute maximum ratings input power input power @ 1 db @ 0.1 db control voltage temperature compression compression (v) (c) (dbm) (dbm) 3 -40 20.5 16.5 3 25 20.0 15.3 3 85 19.0 14.0 5 -40 28.5 23.0 5 25 28.0 23.0 5 85 27.5 23.0 compression point vs. voltage and temperature frequency: 500 mhz. control voltage temperature ip3 @ +5 dbm (v) (c) each t one (dbm) 3 -40 45.5 3 25 45.0 3 85 34.0 5 -40 45.5 5 25 45.5 5 85 40.5 ip3 vs. voltage and temperature two tone input power: +5 dbm each tone. tone frequencies: 900 and 901 mhz. performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the absolute maximum specifications. exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty. caution: although this device is designed to be as robust as possible, electrostatic discharge (esd) can damage this device. this device must be protected at all times from esd. static charges may easily produce poten- tials of several kilovolts on the human body or equipment, which can discharge without detection. industry-standard esd precautions must be employed at all times.
data sheet AS196-307, AS196-307lf skyworks solutions, inc. phone [781] 376-3000 fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com 200126 rev. a skyworks proprietary information products and product information are subject to change without notice. january 10, 2005 5 0.026 (0.65 mm) 0.012 (0.30 mm) 0.020 (0.51 mm) 0.110 (2.79 mm) sq. 0.008 (0.20 mm) 0.008 (0.20 mm) surface mount land pattern 4 x 4 mm lpcc-16 lead sk39110 rev 2 1 j 1 v ctl j 3 j 2 pcb evaluation board sp4t lpcc-16 (4 x 4 mm) v p 47 pf capacitor 5 places AS196-307 thru path pc mount sma connector 5 places evaluation pcb pcb# sk39110. material: fr4. the circuit board used in the final application should employ rf circuit design techniques. rf signal lines should have 50 ? impedance. the package bottom ground plane should be connected directly to pcb ground plane. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation circuit board shown is available upon request.
skyworks solutions, inc. phone [781] 376-3000 fax [781] 376-3100 sales@skyworksinc.com www.skyworksinc.com january 10, 2005 skyworks proprietary information products and product information are subject to change without notice. 200126 rev. a data sheet AS196-307, AS196-307lf 6 copyright ? 2002, 2003, 2004, 2005, skyworks solutions, inc. all rights reserved. information in this document is provided in connection with skyworks solutions, inc. (?skyworks?) products. these materials are pr ovided by skyworks as a service to its customers and may be used for informational purposes only by the customer. skyworks assumes no responsibility for errors or omissions in these materi als. skyworks may make changes to its documentation, products, specifications and product descriptions at any time, without notice. skyworks makes no commitment to update the information and s hall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from future changes to its documentation, products, specifications and product de scriptions. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by or under this document . except as may be provided in skyworks terms and conditions of sale for such products, skyworks assumes no liability whatsoever in association with its documentation, products, specifications a nd product descriptions. these materials are provided ?as is? without warranty of any kind, either express or implied or otherwise, relating to sale and/or use of skyworks products including warranties relating to fitness for a particular purpose, merchantability, performance, quality or non-infringement of any patent, c opyright or other intellectual property right. skyworks further does not warrant the accuracy or completeness of the information, text, graphics or other items c ontained within these materials. skyworks shall not be liable for any damages, including special, indirect, incidental, or consequential damages, including without l imitation, lost revenues or lost profits that may result from the use of these materials whether or not the recipient of materials has been advised of the possi bility of such damage. skyworks products are not intended for use in medical, lifesaving or life-sustaining applications. skyworks customers using or se lling skyworks products for use in such applications do so at their own risk and agree to fully indemnify skyworks for any damages resulting from such improper use or sale. the following are trademarks of skyworks solutions, inc.: skyworks?, the skyworks logo, and breakthrough simplicity?. product names or services listed in this publication are for identification purposes only, and may be trademarks of skyworks or other third parties. third-party brands and names are the property of their r espective owners. additional information, posted at www.skyworksinc.com, is incorporated by reference.
|
